Example production brief — draft; finished publication requires an original plan and qualified review.
Scenario
Use a fictional residence with entry, living/dining, kitchen, bedrooms, exterior, and utility/control location. Define the occupant scenarios and electrical/control assumptions without implying the drawing is permit-ready.
Required drawing layers
- Controlled loads and load IDs; room/zone boundaries; keypad, dimmer/relay, occupancy/daylight sensor, and interface locations.
- Panel/controller, gateway, network, power, wired/wireless control path, and service access.
- Keypad button/scene intent, scheduled behavior, manual fallback, and integration ownership.
- Shared IDs across floor plan, load schedule, keypad/scene schedule, topology, BOM, and test checklist.
Original value
Publish an annotated plan, two schedules, control topology, three scene narratives, commissioning checklist, and a before/after coordination correction.
Review
Mark all samples educational and require current electrical/code/manufacturer/project approval.